Howo 6x4 Mixer Truck 10 CBM
|Min. Order:||1 Set/Sets|
|Place of Origin:||Shandong, China|
|Port:||China Port,Tianjin Port,Yantai Port|
Model No.: ZZ1257N4047
The role of the mixer truck is to transport the concrete from the pumping station to the construction site. During the transportation, the mixer drum will always be kept rotating to ensure that the carried concrete will not solidify. After the concrete is transported, the inside of the mixing drum is usually washed with water to prevent the residual concrete from hardening and occupying space, so that the volume of the mixing drum becomes less and less.
The mixer truck is suitable for concrete transportation such as building houses, repairing roads, canals, dams, tunnels, mines, railways, electric power, bridges, ports, etc. It is beneficial, low cost, economical and practical, and is an ideal operating vehicle for investment and entrepreneurship.
Whether the driving device is reliable is an issue that must be paid attention to in use. In order to ensure the integrity and reliability of the drive device, the following maintenance work should be done:
a. The universal rotating part is the part with frequent failures. Grease should be added on time, and the wear condition should be checked frequently and repaired and replaced in time. The team should have a spare cardan shaft assembly to ensure that it can resume work within tens of minutes in the event of a failure.
b. Ensure that the hydraulic oil is clean. The working environment of the concrete mixer truck is harsh, and the dirty cement sand must be prevented from entering the hydraulic system. The hydraulic oil should be replaced regularly according to the requirements of the user manual. Once the hydraulic oil is found to be mixed with water or sand during the inspection, it is necessary to stop the machine immediately to clean the hydraulic system and replace the hydraulic oil.
c. Ensure that the hydraulic oil cooling device is effective. It is necessary to clean the hydraulic oil radiator regularly to prevent the radiator from being blocked by cement, check whether the electric fan of the radiator is operating normally, and prevent the hydraulic oil temperature from exceeding the standard. As long as the hydraulic oil is clean, there are not many failures in the hydraulic part.
Specifications for Sinotruk Howo 6x4 Mixer truck 10CBM
ZZ1257N4047 (Left or Right Hand Driving Type)
2021, new truck.
HW76 cabin with one sleeper
Two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, air conditioner
Hydraulic steering with power assistance (ZF8118 or ZF8098)
HF9, 2x9000 KGS
12 leaf semi-elliptic
12.00R20/12R22.5 radial steel tire 11 Pieces including one spare.
Fuel Tank Body
Discharge Speed(M3/min) ≤2
Slump Scope (mm):50-220
Water Supply System: 400L/Pneumatic
Drum Material: Head 8mm;Body 5mm; Blade:3mm、4mm、5mm
White; Yellow; Blue; Orange; Black; Red or others
Sino Howo Truck Co Ltd.
SINOTRUK is the first heavy duty truck manufacturer, initially founded in 1956 and the cradle of China`s heavy duty truck industry. It once manufactured China`s first heavy duty truck – Huanghe branded JN150 8-ton truck in 1960; and successfully introduced the STEYR heavy duty truck project from Austria and became China`s first company to comprehensively introduce foreign heavy duty truck manufacturing technology of complete vehicle in 1983. SINOTRUK was formally established after the reform and restructuring in 2001 and, through more than 10 years` development, has become a domestically and internationally renowned heavy duty truck R&D and manufacturing group. SINOTRUK became a publicly traded company in HKSE main board as a red chip in 2007, setting up a platform for international expansion. In 2009, SINOTRUK formed its strategic partnership with German MAN Group, by which Man held a 25%+1 stake in SINOTRUK (Hong Kong) Limited and SINOTRUK introduced 3 models (D20, D26 and D08) of engines, axles of middle and heavy trucks, and relevant technologies of complete vehicles from MAN, laying a solid foundation for corporate long-term growth. Today, SINOTRUK has developed into China`s largest heavy duty truck manufacturing base and made significant contribution to the development of China`s heavy duty truck industry and national economic growth.
- Company Name: Sino Howo Truck Co Ltd.
- Representative: Chenling
- Product/Service: Sinotruk HOWO , Sinotruk HOWO A7 , Heavy Duty Truck , HOWO Truck , Dump Truck , Spare Parts
- Capital (Million US $): 1000RMB
- Year Established: 2013
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Heavy Truck Mansion, No.01 Dawei East Road, Tianqiao District, Jinan City, Shandong Province, China
- Contact Person: Mr. Manager
- Tel: +86-531-58768110
Premium Related Products